All Identifiers

Name Unit Description
DLL_REVISION OP510MDLL

 

OP510_CloseDriver OP510MDLL

Close the driver, closing the connection and communication with the device.

OP510_GetDLLRev OP510MDLL

Get the revision number of DLL

OP510_GetDLLStatus OP510MDLL

Get the initialization status of the DLL and USB device

OP510_GetFWRevision OP510MDLL

Get the device's firmware revision

OP510_GetModuleID OP510MDLL

Get the Module ID (internal product code) of the device.

OP510_GetTemperature OP510MDLL

Get the temperature in the specified units.

OP510_GetUSBDeviceCount OP510MDLL

Get the number of connected compatible USB devices.

OP510_GetUSBDeviceDescription OP510MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP510_GetUSBSerialNumber OP510MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP510_GetUSBStatus OP510MDLL

Get the USB error flag of last operation as well as the error code.

OP510_GetWavelength OP510MDLL

Get the active channel's current wavelength information.

OP510_NextWavelength OP510MDLL

Set wavelenght to the next one the active channel's list of available measurement wavelength.

OP510_OpenDriver OP510MDLL

Initialize the device with the given USB Handle.

OP510_OpenUSBDevice OP510MDLL

Open the specified USB device and get a USB Handle.

OP510_ReadAnalog OP510MDLL

Read raw ADC values for current active OPM channel.

OP510_ReadLoss OP510MDLL

Read power loss from active channel.

OP510_ReadPower OP510MDLL

Read power from active channel.

OP510_ReferencePower OP510MDLL

Perform internal power reference for active OPM channel.

OP510_SelectModule OP510MDLL

Select the specified module.

OP510_SetAbsolute OP510MDLL

Set active channel to absolute (dBm) measurement mode.

OP510_SetAutoRange OP510MDLL

Set the Auto-Range on or off (Range-Hold).

OP510_SetGain OP510MDLL

Set the current gain (must have Auto-Range set to off).

OP510_SetReference OP510MDLL

Perform internal power reference then set active channel to relative (dB) measurement mode.

OP510_SetWavelength OP510MDLL

Set the active channel's measurement wavelength.

OP710_ActiveModule OP710MDLL

Check if module is active and returns USB Handle for that module if it is.

OP710_Backlight OP710MDLL

Turn the front panel display backlight on or off.

OP710_CloseDriver OP710MDLL

Close the driver, closing the connection and communication with the device.

OP710_ConvertPower OP710MDLL

Convert a pair of raw ADC value and gain (from ReadAnalog) to power in dBm.

OP710_GetActiveChannel OP710MDLL

Get the current active channel.

OP710_GetBulk OP710MDLL

Perform a fast, repeated, simultaneous power measurement from all channels.

OP710_GetChannelBuffer OP710MDLL

Measure power from all channels simultaneously.

OP710_GetDLLRev OP710MDLL

Get the revision number of DLL

OP710_GetDLLStatus OP710MDLL

Get the initialization status of the DLL and USB device

OP710_GetFWRevision OP710MDLL

Get the device's firmware revision

OP710_GetModuleID OP710MDLL

Get the Module ID (internal product code) of the device.

OP710_GetModuleNumber OP710MDLL

Get the module number of currently selected module.

OP710_GetTemperature OP710MDLL

Get the temperature in the specified units.

OP710_GetUSBDeviceCount OP710MDLL

Get the number of connected compatible USB devices.

OP710_GetUSBDeviceDescription OP710MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP710_GetUSBSerialNumber OP710MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP710_GetUSBStatus OP710MDLL

Get the USB error flag of last operation as well as the error code.

OP710_GetWavelength OP710MDLL

Get the active channel's current wavelength information.

OP710_NextWavelength OP710MDLL

Set wavelenght to the next one the active channel's list of available measurement wavelength.

OP710_OpenDriver OP710MDLL

Initialize the device with the given USB Handle.

OP710_OpenUSBDevice OP710MDLL

Open the specified USB device and get a USB Handle.

OP710_ReadAnalog OP710MDLL

Read raw ADC values for current active OPM channel.

OP710_ReadChannelBuffer OP710MDLL

Read the power measured by GetChannelBuffer for the specified channel.

OP710_ReadChannelBufferRaw OP710MDLL

Read the raw ADC power measured by GetChannelBuffer for the specified channel.

OP710_ReadLoss OP710MDLL

Read power loss from active channel.

OP710_ReadPower OP710MDLL

Read power from active channel.

OP710_ReferencePower OP710MDLL

Perform internal power reference for active OPM channel.

OP710_RemoteMode OP710MDLL

Set Remote Mode.

OP710_SelectModule OP710MDLL

Select the specified module.

OP710_SetAbsolute OP710MDLL

Set active channel to absolute (dBm) measurement mode.

OP710_SetActiveChannel OP710MDLL

Set the current active channel.

OP710_SetAutoRange OP710MDLL

Set the Auto-Range on or off (Range-Hold).

OP710_SetBulkMode OP710MDLL

 

OP710_SetGain OP710MDLL

Set the current gain (must have Auto-Range set to off).

OP710_SetOPMMode OP710MDLL

Set power measurement mode, if supported.

OP710_SetReference OP710MDLL

Perform internal power reference then set active channel to relative (dB) measurement mode.

OP710_SetSamplingSpeed OP710MDLL

 

OP710_SetWavelength OP710MDLL

Set the active channel's measurement wavelength.

OP720_ActiveModule OP720MDLL

Check if module is active and returns USB Handle for that module if it is.

OP720_CloseDriver OP720MDLL

Close the driver, closing the connection and communication with the device.

OP720_GetActiveChannel OP720MDLL

Get the current active channel.

OP720_GetDLLRev OP720MDLL

Get the revision number of DLL

OP720_GetDLLStatus OP720MDLL

Get the initialization status of the DLL and USB device

OP720_GetModuleID OP720MDLL

Get the Module ID (internal product code) of the device.

OP720_GetNumChannels OP720MDLL

Get the number of channels.

OP720_GetUSBDeviceCount OP720MDLL

Get the number of connected compatible USB devices.

OP720_GetUSBDeviceDescription OP720MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP720_GetUSBSerialNumber OP720MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP720_OpenDriver OP720MDLL

Initialize the device with the given USB Handle.

OP720_OpenUSBDevice OP720MDLL

Open the specified USB device and get a USB Handle.

OP720_SetActiveChannel OP720MDLL

Set the current active channel.

OP720_SetCompoundChannel OP720MDLL

Select a switch bank and set the active channel for that bank.

OP750_CloseDriver OP750MDLL

Close the driver, closing the connection and communication with the device.

OP750_GetActiveChannel OP750MDLL

Get the current active channel.

OP750_GetDLLRev OP750MDLL

Get the revision number of DLL

OP750_GetDLLStatus OP750MDLL

Get the initialization status of the DLL and USB device

OP750_GetFWRevision OP750MDLL

Get the device's firmware revision

OP750_GetModuleID OP750MDLL

Get the Module ID (internal product code) of the device.

OP750_GetTemperature OP750MDLL

Get the temperature in the specified units.

OP750_GetUSBDeviceCount OP750MDLL

Get the number of connected compatible USB devices.

OP750_GetUSBDeviceDescription OP750MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP750_GetUSBSerialNumber OP750MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP750_GetUSBStatus OP750MDLL

Get the USB error flag of last operation as well as the error code.

OP750_OpenDriver OP750MDLL

Initialize the device with the given USB Handle.

OP750_OpenUSBDevice OP750MDLL

Open the specified USB device and get a USB Handle.

OP750_RemoteMode OP750MDLL

Set Remote Mode.

OP750_SelectModule OP750MDLL

Select the specified module.

OP750_SetActiveChannel OP750MDLL

Set the current active channel.

OP750_SetSource OP750MDLL

Set the selected source's state.

OP750_SetSourceModulation OP750MDLL

Set the selected source's modulation.

OP750_SetSourcePower OP750MDLL

Set the selected source's power.

OP815_Backlight OP831MDLL

Turn the front panel display backlight on or off.

OP815_GetActiveChannel OP831MDLL

Get the current active channel.

OP815_GetBidirectionalReference OP831MDLL

Perform bidirectional reference (internal OPM) for OP831.

OP815_GetChannelBuffer OP831MDLL

Measure power from all channels simultaneously.

OP815_GetDLLRev OP831MDLL

Get the revision number of DLL

OP815_GetDLLStatus OP831MDLL

Get the initialization status of the DLL and USB device

OP815_GetFWRevision OP831MDLL

Get the device's firmware revision

OP815_GetModuleID OP831MDLL

Get the Module ID (internal product code) of the device.

OP815_GetModuleNumber OP831MDLL

Get the module number of currently selected module.

OP815_GetNumSources OP831MDLL

Get the number of sources available in the unit.

OP815_GetSourceTable OP831MDLL

Get the details of the source number indicated.

OP815_GetTemperature OP831MDLL

Get the temperature in the specified units.

OP815_GetUSBDeviceCount OP831MDLL

Get the number of connected compatible USB devices.

OP815_GetUSBDeviceDescription OP831MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP815_GetUSBSerialNumber OP831MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP815_GetUSBStatus OP831MDLL

Get the USB error flag of last operation as well as the error code.

OP815_GetWavelength OP831MDLL

Get the active channel's current wavelength information.

OP815_NextWavelength OP831MDLL

Set wavelenght to the next one the active channel's list of available measurement wavelength.

OP815_OpenDriver OP831MDLL

Initialize the device with the given USB Handle.

OP815_OpenUSBDevice OP831MDLL

Open the specified USB device and get a USB Handle.

OP815_OperationMode OP831MDLL

Set bidirectional operation mode for OP831.

OP815_ReadABPower OP831MDLL

Read A-B Direction Power (internal OPM) for OP831.

OP815_ReadAnalog OP831MDLL

Read raw ADC values for current active OPM channel.

OP815_ReadBAPower OP831MDLL

Read B-A Direction Power (internal OPM) for OP831.

OP815_ReadChannelBuffer OP831MDLL

Read the power measured by OP930_GetChannelBuffer for the specified channel.

OP815_ReadLoss OP831MDLL

Read power loss from active channel.

OP815_ReadPower OP831MDLL

Read power from active channel.

OP815_ReferencePower OP831MDLL

Perform internal power reference for active OPM channel.

OP815_RemoteMode OP831MDLL

Set Remote Mode.

OP815_SelectModule OP831MDLL

Select the specified module.

OP815_SetAbsolute OP831MDLL

Set active channel to absolute (dBm) measurement mode.

OP815_SetActiveChannel OP831MDLL

Set the current active channel.

OP815_SetAutoRange OP831MDLL

Set the Auto-Range on or off (Range-Hold).

OP815_SetGain OP831MDLL

Set the current gain (must have Auto-Range set to off).

OP815_SetReference OP831MDLL

Perform internal power reference then set active channel to relative (dB) measurement mode.

OP815_SetSourcePower OP831MDLL

Set the source power of the specified source.

OP815_SetWavelength OP831MDLL

Set the active channel's measurement wavelength.

OP815_SourceON OP831MDLL

Directly toggle a source ON or OFF.

OP925_CalculateCWRL OP831MDLL

This is a utility function to calculate CWRL using caller-provided reference value, dark value, and raw power measurement.

OP925_GetDarkValue OP831MDLL

Get the stored dark value from the device.

OP925_MeasureCWRL OP831MDLL

Measure CWRL for the specified source wavelength.

OP925_ReferenceCWRL OP831MDLL

Reference the specified CWRL source wavelength.

OP925_ReferenceDarkCWRL OP831MDLL

Reference dark value of the specified CWRL source wavelength.

OP930_AbortRLReference OP930MDLL

Abort currently in-progress RL scan reference.

OP930_ActiveModule OP930MDLL

Check if module is active and returns USB Handle for that module if it is.

OP930_Backlight OP930MDLL

Turn the front panel display backlight on or off.

OP930_BidirectionalMode OP930MDLL

Toggle BiDi (Bidirectional) mode.

OP930_CheckDCOffsetDisplacement OP930MDLL

Check the specified DC Offset Displacement.

OP930_CloseDriver OP930MDLL

Close the driver, closing the connection and communication with the device.

OP930_FastRLReference OP930MDLL

Perform a fast, RL scan reference.

OP930_GetActiveChannel OP930MDLL

Get the current active channel.

OP930_GetChannelBuffer OP930MDLL

Measure power from all channels simultaneously.

OP930_GetDLLRev OP930MDLL

Get the revision number of DLL

OP930_GetDLLStatus OP930MDLL

Get the initialization status of the DLL and USB device

OP930_GetDUTLength OP930MDLL

Calculate the DUT length.

OP930_GetExternalSwitch OP930MDLL

Check if an external switch is attached (for OP940 with OP725).

OP930_GetFrontpanel OP930MDLL

Get the frontpanel position.

OP930_GetFWRevision OP930MDLL

Get the device's firmware revision

OP930_GetModuleID OP930MDLL

Get the Module ID (internal product code) of the device.

OP930_GetModuleNumber OP930MDLL

Get the module number of currently selected module.

OP930_GetReturnLossAB OP930MDLL

Measure Return Loss for the current source pair (AB or CD) simultaneously.

OP930_GetRLCorrection OP930MDLL

Get RL measurement correction values per channel per wavelength.

OP930_GetSamplerData OP930MDLL

Get Return Loss sampler data.

OP930_GetTemperature OP930MDLL

Get the temperature in the specified units.

OP930_GetUSBDeviceCount OP930MDLL

Get the number of connected compatible USB devices.

OP930_GetUSBDeviceDescription OP930MDLL

Get the USB Device Description (up to 16 characters) of the specified device.

OP930_GetUSBSerialNumber OP930MDLL

Get the USB Device Serial Number (8 characters) of the specified device.

OP930_GetUSBStatus OP930MDLL

Get the USB error flag of last operation as well as the error code.

OP930_GetWavelength OP930MDLL

Get the active channel's current wavelength information.

OP930_LoadModuleParameters OP930MDLL

@ exclude

OP930_NextWavelength OP930MDLL

Set wavelenght to the next one the active channel's list of available measurement wavelength.

OP930_OpenDriver OP930MDLL

Initialize the device with the given USB Handle.

OP930_OpenUSBDevice OP930MDLL

Open the specified USB device and get a USB Handle.

OP930_OperationMode OP930MDLL

Toggle the source pair (A/B, C/D) for FTTX devices.

OP930_ReadAnalog OP930MDLL

Read raw ADC values for current active OPM channel.

OP930_ReadChannelBuffer OP930MDLL

Read the power measured by OP930_GetChannelBuffer for the specified channel.

OP930_ReadLoss OP930MDLL

Read power loss from active channel.

OP930_ReadPower OP930MDLL

Read power from active channel.

OP930_ReferenceDUT OP930MDLL

Perform a software-based RL scan reference to the end of the DUT.

OP930_ReferencePower OP930MDLL

Perform internal power reference for active OPM channel.

OP930_ReferenceRefCable OP930MDLL

Perform a software-based RL scan reference (instead of the internal reference).

OP930_ReferenceReturnLoss OP930MDLL

Reference Return Loss for current source pair (AB or CD) simultaneously.

OP930_ReferenceReturnLoss_Scan OP930MDLL

Perform a software-based RL scan reference (instead of the internal reference).

OP930_RemoteMode OP930MDLL

Set Remote Mode.

OP930_RLCorrectionMode OP930MDLL

Use RL Correction specified from OP930_SetRLCorrection.

OP930_ScanDCOffsetDisplacement OP930MDLL

Scan for an appropriate DC Offset Displacement from the specified.

OP930_ScanRLWindow OP930MDLL

Perform a scan across the specified scan window from a specified start position to an end position.

OP930_SelectModule OP930MDLL

Select the specified module.

OP930_SetAbsolute OP930MDLL

Set active channel to absolute (dBm) measurement mode.

OP930_SetActiveChannel OP930MDLL

Set the current active channel.

OP930_SetAdditionalDisplacement OP930MDLL

Set additional displacement for Return Loss DC offset measurement.

OP930_SetAutoRange OP930MDLL

Set the Auto-Range on or off (Range-Hold).

OP930_SetCoarseDelay OP930MDLL

Set the scan window (coarse position/delay) for Return Loss measurements.

OP930_SetDCOffsetDisplacement OP930MDLL

Set the DC Offset Displacement to the one specified.

OP930_SetDirection OP930MDLL

Set the A-B or B-A direction for BiDi devices.

OP930_SetGain OP930MDLL

Set the current gain (must have Auto-Range set to off).

OP930_SetNoiseThreshold OP930MDLL

Set the ADC value max delta (0-255) when comparing the DC Offset ADC value to the noise ADC (typically 400).

OP930_SetRefAutoRange OP930MDLL

Set Return Loss reference autoranging ON or OFF.

OP930_SetReference OP930MDLL

Perform internal power reference then set active channel to relative (dB) measurement mode.

OP930_SetRepRate OP930MDLL

Set the repetition rate of the pulsed source.

OP930_SetRLCorrection OP930MDLL

Set RL measurement correction values per channel per wavelength.

OP930_SetRLLimit OP930MDLL

Set RL measurement limit/cap.

OP930_SetRLMeasurementPosition OP930MDLL

Set the Return Loss measurement position for current source pair (AB or CD) simultaneously.

OP930_SetScanOffset OP930MDLL

Set the Return Loss reference scan offset distance in meters.

OP930_SetSourceMode OP930MDLL

Toggle source between IL Mode (CW) and RL Mode (Pulsed).

OP930_SetSwitchChannel OP930MDLL

Set the source switch channel.

OP930_SetWavelength OP930MDLL

Set the active channel's measurement wavelength.

OP930_SourceON OP930MDLL

Directly toggle a source ON or OFF.

OP930_UseSwitchOffsetTable OP930MDLL

Toggle usage of the Switch Offset Table (SWOT).

TFT_HANDLE OP930MDLL

USB Handle Type.

TFT_HANDLE OP510MDLL

USB Handle Type.

TFT_HANDLE OP710MDLL

USB Handle Type.

TFT_HANDLE OP720MDLL

USB Handle Type.

TFT_HANDLE OP750MDLL

USB Handle Type.

TFT_HANDLE OP831MDLL

USB Handle Type.

TFT_HANDLE_PTR OP930MDLL

USB Handle Pointer Type.

TFT_HANDLE_PTR OP831MDLL

USB Handle Pointer Type.

TFT_HANDLE_PTR OP710MDLL

USB Handle Pointer Type.

TFT_HANDLE_PTR OP720MDLL

USB Handle Pointer Type.

TFT_HANDLE_PTR OP510MDLL

USB Handle Pointer Type.

TFT_HANDLE_PTR OP750MDLL

USB Handle Pointer Type.


Generated by PasDoc 0.15.0.